Following my review of the excellent Blink XT, I was quite excited to try out the Canary Flex. Priced at £199 it is a premium looking product with some promising features that could justify the extra cost over the Blink XT or the identical cost of the Netgear Arlo.

The device itself is quite attractive as far as security cameras go, and it has a nice weighty feel, the overall build quality is far superior to the Blink. Unlike Blink and Arlo the Canary uses a built-in lithium-ion battery and can be used in wired or wire-free mode. Having the option to work as a wired camera or wire free is obviously excellent, but the removable batteries of both the Arlo and Blink make using them preferably in a wire-free environment.

Similar to the Arlo, the Canary attached to its base with a strong magnet, and this allows you to adjust the camera to almost any position. This is fantastic for indoor use, but as this is targeted for outdoor use, the mount just isn’t secure enough to be exposed to the environment or potential intruders.

Set up

When setting it up, I did temporarily use this mount, placing it on a window ledge stuck down (so I didn’t have to drill more holes in my brickwork). One of the issues I found was that the IR sensor is located quite close to the base, so while you can have unlimited adjustments, if you lean the camera too far forward it will negatively affect the IR illumination and detection. This led me to buy one of the secure mounts which is an additional £29.99, and I wouldn’t say it is overly secure, you still want it way out of harms reach. Canary does have some innovative mounts though, such as a garden take and twisty mound that allows you to wrap it against posts/branches.

Unlike the other two brands, the Canary is an all in one unit, so you don’t have to worry about finding somewhere to plug in the base module. Setting it up is relatively simple, as with most well-made cameras nowadays. Just sign up, and follow the instructions. It took me less than 5 minutes to set up, though the firmware update did take a while.

After I had set up the camera, I was offered to sign up for the premium service, which costs £7.99 per month for up to 5 devices. In comparison, the Blink is free to use as recordings are kept on the device and Arlo is £6.49 for up to 10 cameras. Unfortunately, what is quite annoying is that the free plan Canary offers severely limits the functionality of the device, with this option you get 30-second clips and 1-day video history. There is not two-way talk, desktop streaming, or unlimited downloads. As I trialled the premium service, I am not 100% sure what the limitation would be on the downloads.  In comparison, the Arlo basic plans offer seven days full recordings but with a 1GB limit, which should be enough for most users as long as you review the footage frequently.


When I initially set up the camera on a window ledge, it partially faced the road, this then generated a large number of recordings, and my battery dropped to 50% in 2 days. Also, because the IR sensor was partially obstructed, night time recording was useless. Unlike the Arlo you cannot set trigger zones, so you need to think about the placement quite carefully. This led me to use the secure mount on a fence post facing my front door. In this position, the Canary performs much better, and the quality of both the daytime and nighttime recordings are excellent for a 720p camera. In this position, motion detection seems to be good, and I have only had a few false recordings.


The app itself is far prettier than the Blink system, but in reality, I found it harder to use than both the Blink and Arlo. Connecting to a live feed takes maybe 30 seconds as the app needs to wake the camera up making this feature almost useless is wire free mode. It is much faster in the wired mode, and also in this mode, you won’t have to worry about battery drain. When viewing videos in your timeline things are a bit faster, and you can make notes, tag videos, or make an emergency call. You can also download the video, but in order to do this, you first have to request the download then download it, which is an annoying, time-consuming process.