Aqara Camera Hub G2H Review Rating
Aqara is an ideal entry point for anyone looking into a customisable home automation system. It is easy to set up and use via the Aqara app and with Home Assistant you have unlimited home automation potential. The Aqara Camera Hub G2H is both an affordable hub, but also a useful indoor security camera and motion sensor.
Overall - 85%
- Extremely affordable Zigbee smart hub
- Basic security camera built-in (with local microSD storage)
- Aqara ecosystem is more affordable than competing brands
- Easy to set up
- Hub/App supports fewer products than SmartThings
- Need to use Home Assistant for full potential
Aqara has been a popular, affordable smart home ecosystem for a few years now. They recently launched their official Amazon UK store, so there is no more waiting around for imports with most of the devices available via Amazon Prime.
I have been checking out the Aqara Camera Hub G2H hub with some of the accessories for the past few days and have been very impressed. This system makes an excellent alternative to the more expensive SmartThings range of devices.
Set up is much the same as any other smart home piece of tech. You need the Aqara app, and from here, you will need to add your hub via Add Accessory. For the hub, you need to reset it via the pinhole button and the app should identify it and add it.
Adding accessories is done in a similar manner. You select the accessory you want to add, the app tells you how to put it into pairing mode (normally just pressing a button), and it should add automatically.
Everything added quickly without failure, and I was all set up within minutes.
Aqara is only compatible with the Zigbee wireless protocol, however you open up your Aqara devices to other systems via Home Assistant/HomeKit
Shamefully, even though I write a lot about home automation, I have never set up Home Assistant. For some reason, I have always just associated it with Apple, obviously getting mixed up with HomeKit.
I already run a Ubuntu server with Docker, so setting this up took a matter of minutes, if not seconds. I just copied the Docker code into SSH and then browsed to the IP. In the future, I will integrate it into a YAML file.
During the set-up process, Home Assistant automatically recognises that the G2H hub is on the system, to connect, you need the pairing code on the base of the camera. Once you input that it will import both the camera and all its accessories, you can then assign them to the correct rooms.
Like most home automation systems, the Aqara automation process is quite simple, using an if this then that approach.
You can add multiple devices/events for your trigger and use them with and/or conditions and then the same with the action you carry out.
As I only have a few sensors, I quickly set up notifications whenever motion is detected within a set period of time.
Automation via Home Assistant
The if/then automation process built into the Aqara app is nice and user friendly but it is limited by the devices you have paired up with Aqara. For most people, this will likely be a few sensors.
Aqara doesn’t have the cross-platform compatibility that Samsung SmartThings does, but Home Assistant does.
Within the Automations you can set up home automation runs that will accept triggers from any of your devices or from a wide range of other options such as time, sun, and NFC tags.
You can then carry out actions, again with any device on the network.
It is more complex to set up, but with this, I was able to get the Aqara motion sensor to switch on my Philips Hue lights when motion detection occurred, plus various other simple automations.
Within the Aqara app, but also with Home Assistant, you can group up automations and various other actions into a scene.
So with the Aqara app, a can have a Home/Away scene which will enable or disable motion alerts.
Within Home Assistant, I can expand this functionality across all my smart home equipment. So my morning scene can switch all my lights and plugs on but disable motion detection and the camera.
I am not a huge fan of indoor cameras, I have always felt that they are a little too intrusive. However, that’s just personal preference. The G2H works well, it is basic, providing a reasonably good quality image.
Video is recorded to the microSD card, so whatever it does record is not going into the cloud-like some options (which makes indoor cameras even more off-putting). You can also enable/disable it via automations or within the app as and when you need, so it doesn’t have to be recording when you are in the house.
While I don't personally use Apple devices, the G2H will work with HomeKit Secure Video (HSV)
It is great value for money considering you get a camera, motion detection and home automation hub all in one for less than some companies charge just for the camera.
Price and Alternative Options
- 【HomeKit Secure Video】The aqara indoor camera...
- 【Local Control Center】As a zigbee hub, it can...
- 【Voice Call In Real Time】Homekit-enabled 2-way...
- 【Night Vision & 1080p HD】With 1080p...
The Aqara Camera Hub G2H is priced at £64.99, available on Amazon.
You then have a wide range of accessories, including:
- Aqara M2 Smart Hub (a none camera hub) for £54.99
- Door and window sensor for £17.99
- Temperature and Humidity sensor for £19.99
- Motion sensory for £21.99
- Water sensor for £19.99
- Aqara Indoor Air Quality Monitor for £80
- Wireless mini switch for £17.99
- In wall double switch for £42.99
It looks like Aeotec are producing many of the SmartThings accessories now such as:
- Aeotec Smart Home Hub for £99 (also works with Z-Wave)
- Aeotec Smart Home Button for £21.40
- Aeotec SmartThings Motion Sensor for £30
Then Z-Wave devices are even more expensive
- Z-Wave Plus Aeotec Smart Switch 6 for around £55
- Fibaro Flood Sensor for £49
- Aeotec MultiSensor 6 for £55 (while expensive, these are far superior to basic motion sensors)
Aqara, in general, is a fantastic way to get into smart home/home automation. The range of products is affordable and easy to use, and with the help of Home Assistant, you can expand the functionality to work across many platforms.
The Aqara Camera Hub G2H itself works well, being great value for money. While I am not a massive fan of indoor cameras, you are only paying an extra tenner over the M2 hub, and this then gives you a camera, motion detection and two-way talk.
Much like Z-Wave/SmartThings, using Aqara by itself does provide limited usefulness. You have plenty of sensors, all of which are good for warning you about stuff, but limited devices that they can interact with. The main options appear to be the light switches which would work out as a cheap way to automate your lights (especially if you run GU10 spotlights).
Integrating Aqara with Home Assistant and then whatever other smart home products you may have is when things become much more interesting. This allows you to build a home automation system at a fraction of the cost vs committing to one well-featured standard such as Z-Wave.
Last update on 2022-01-28 / Affiliate links / Images from Amazon Product Advertising API