Zdnet are reporting some very interesting information about the rumoured Microsoft Pink Phone.
While the Pink Phone has not been confirmed the rumours are largely fuelled by the specification for the Windows Mobile 7 Chassis 1.
According to Znet they received the following specification from a “trustworthy source”
WM7 Chassis 1 Specification
Processor: ARM v6+, L2 Cache, VFP, Open GL ES 2.0 graphics HW (QCOM 8k, Nvidia AP15/16(AKA Tagra) and TI 3430 all meet spec)
Memory: 256MB+ DRAM, 1G+ Flash (at least 512MB fast flash – 5MB/s unbuffered read @4K block size)
Display: WVGA (800×480) or FWVGA (854×480) 3.5” or greater diagonal
Touch: Multi-touch required
Battery: Sufficient to meet Days of Use LTK requirements.
Controls: Start, Back, Send and End are required (soft controls allowed as long as they are always present).
Camera: 3MP+, flash optional, 2nd camera optional (VGA resolution sufficient)
GPS: aGPS required
Sensors required: Light Sensor, Compass (3 axis, 5 degrees, 100 Hz sample rate), Accelerometer (3 axis, 2mg resolution, 100 Hz sample rate)
USB: High speed required, 20 MB/s transfer rate.
BlueTooth: BT2.1 required, must run MSFT BT stack, CSR BlueCore6 or later recommended.
Wi-Fi: 802.11B/G required, must run MSFT Native Wi-Fi stack, Atheros 6002 or Broadcomm 4325 recommended.
Connectors: Micro USB and 3.5mm Audio required.
FM tuner: If tuner HW is present it will be detected and supported by the Media application.
SD Card (Micro SD recommended)
DPAD, qwerty or 12/20 key keyboards all optional
It is strongly suspected that the reference to the QCOM 8k will be the immense Snapdragon’s QSD8xxx-series chips
It is also worth noting that the NVIDIA Tegra platform is specifically listed as meeting the core CPU requirements, as well as TI’s OMAP 3 platform and the Snapdragon. So in theory the hardware specification all add up, and more importantly they all add up to be a potentially awesome phone.